产品展示

Product Center

current position: Home > Product Center > Teflon card sleeve coupling

Product Center Product

contact usContact Us

SMYTIK (Kunshan) Precision Machinery Co.,Ltd

Contact person: Liu Zong

Mobile phone number: 19951158023

Email: lsy@smytikgroup.com

Website: www.smytikgroup.com

Address: Room 304, Room 8, No.1911, Shuixiu Road, Kunshan City, Jiangsu Province


Teflon card sleeve coupling

Teflon card sleeve coupling

  • Category:Teflon card sleeve coupling
  • Browse number:
  • QR code:
  • Release time:2022-02-15 15:51:53
  • Product description

Teflon joint


Lightweight structure, easy to operate and install


Inner tube material: smooth pure PTEE


Outer braided layer material :304 stainless steel


Working pressure :207bar (3000pslg)


Hose Size :1/4 "to 1"


Operating temperature :-53℃ to 204℃ (-65°F to 400°F)


Standard and customizable lengths are available







Electrostatic discharge


Fluid flowing through a hose can generate static electricity. Choose a hose with sufficient conductivity to ensure the static charge to the ground and allow static electricity to dissipate. If static electricity is possible in an application, choose an electrostatic dissipating hose and ground it properly.


vibration


The amount of vibration of the system should be considered when selecting the hose. Metal hoses may not be suitable for systems with persistent or severe vibration.


The length of the


Hose movement, system pressurization, and thermal expansion must be considered when determining hose length. When the hose length is not enough to meet the requirements of the above factors, the hose service life will be shortened.



Minimum bending radius


The minimum bend radius of the hose must be observed. If the bending radius of the hose is too small, the hose may be twisted and its service life may be shortened.




Strain of hose


Bending the part too close to the hose/connector connection may cause the hose to break or leak.



Absorption of motion


Distribute the movement by sufficient hose length and prevent bending less than the minimum bend radius of the hose.



Machine tool tolerance


Changes in length due to machine movements and tolerances must be considered.



System pressure variation


Adequate hose length should be used to accommodate system pressure changes. Do not connect the high pressure hose to the low pressure hose.




Bend in the same plane


Hose bending should be done on the same plane to avoid distortion. For complex bending, use multiple hoses or other isolation measures.




Rules of coding



Tags

Previous:None
Next:None

Recently Viewed:

Related products

news.related_news

Copyright © SMYTIK (Kunshan) Precision Machinery Co.,Ltd record number:苏ICP备19073820号-1