Taiwan pipe valve

Taiwan pipe valve

Process and instrument pipelines are combined on the same valve body

1/4 NPT female thread standard drain port

1/2 NPT female thread standard outlet

Isolation relief valve group

Pressure and volume refer to ASME B16.34

The handle color has functional zoning

Structure of diversified combination of ball valve and needle valve

Material traceability

Each valve undergoes factory testing in accordance with EN 12266 or API Std 598

Flange ports are available for selection according to ASME B16.5 and EN 1092-1

Discharge port with plug

Compared to traditional design, it saves more weight, space, and cost

Ball valve characteristics

The highest pressure level can reach: Class2500

Working temperature: -54 ℃ to 232 ℃ (-65 ° F to 450 ° F)

Quarter turn opening and closing operation

The directional positioning block displays the open or closed position

The bottom loaded valve stem structure prevents the valve stem from bursting out, improving system safety

High strength valve stem bearing support achieves smooth opening and closing and eliminates friction between the valve stem and valve body

Valves may require adjustments to the packing during use

SMYTIK ball valve is designed for use in the fully open or fully closed position

Needle valve characteristics

The highest pressure level can reach: Class4500

Working temperature: PTFE packing: -54 ℃ to 232 ℃ (-65 ° F to 450 ° F)

Graphite filler: -54 ℃ to 649 ℃ (-65 ° F to 1200 ° F)

Two section valve stem design:

The thread of the upper valve stem is subjected to rolling hardening treatment, and the surface of the lower valve stem is specially hardened

The lubricating grease on the upper valve stem thread is isolated from the system medium

The non rotating lower valve stem moves up and down instead of rotating up and down, avoiding friction between the valve seat sealing surface and the valve head, and greatly reducing friction between the lower valve stem and the packing

The valve is in the fully open position, and the stem has a back sealing function. The handle is locked with screws at both ends, which is stable and durable

OS&Y needle structure

The highest pressure level can reach: Class4500

Working temperature: PTFE packing: -54 ℃ to 232 ℃ (-65 ° F to 450 ° F)

Graphite filler: -54 ℃ to 649 ℃ (-65 ° F to 1200 ° F)

Two section valve stem design:

The thread of the upper valve stem is subjected to rolling hardening treatment, and the surface of the lower valve stem is specially hardened. The lubricating grease on the thread of the upper valve stem is isolated from the system medium

The non rotating lower valve stem moves up and down instead of rotating up and down, avoiding friction between the valve seat sealing surface and the valve head, and greatly reducing friction between the lower valve stem and the packing. The valve cap is connected by bolts, with good strength and high reliability

The valve stem has a back sealing function and can prevent the valve stem from being blown out by the medium pressure. The adjustable packing cover is convenient for adjusting the packing cover to form an effective seal. The one-piece forged valve cap bracket has high strength and ensures that the valve stem is completely concentric. The handle is locked with two screws, which is sturdy and durable

Coding Rules